Measure the current line
Measure conveyor height, width, belt type, guide position and available straight length before selecting the infeed equipment.
Conveyor integration
Conveyor height and transfer geometry decide whether a bottle unscrambler feeds smoothly into the rest of the line.
Specification advice
Measure conveyor height, width, belt type, guide position and available straight length before selecting the infeed equipment.
The bottle should move from the unscrambler to the conveyor without falling, bouncing, twisting or building excessive back pressure.
If multiple bottle formats are needed, guide and height adjustment must be practical for operators during changeover.
Practical checks
The best enquiry includes real bottle information, the target line speed and details of the downstream equipment. This gives the supplier enough information to recommend a sensible machine route instead of guessing from a catalogue picture.
For urgent projects, send bottle photos, sample dimensions, output target, conveyor height and a short description of the current line problem.

Questions
A poor height match can create unstable transfer, jams and bottle starvation.
Often yes, but it should be planned before the machine is ordered.
Yes. It is one of the most useful layout details to provide.
Related pages
Open this page for related bottle unscrambler specification advice.
Open this page for related bottle unscrambler specification advice.
Open this page for related bottle unscrambler specification advice.
Open this page for related bottle unscrambler specification advice.
Open this page for related bottle unscrambler specification advice.
Open this page for related bottle unscrambler specification advice.
Open this page for related bottle unscrambler specification advice.
Open this page for related bottle unscrambler specification advice.
Open this page for related bottle unscrambler specification advice.
Specification support
Lancing UK can advise whether a compact rotary unscrambler, automatic bottle unscrambler or wider line-infeed package is the correct route.